# Zeus tank for direct-lung vaping, which Z coil and which batteries

> The Geekvape Zeus tank, its three generations, the wattage range of each Z coil and the current it draws from your batteries, to set a DL mod properly.


Screwing a Zeus tank onto your mod means taking on a coil family whose wattage ranges come close to doubling from one end to the other. The name also covers several generations of tank, with different diameters and capacities, which shops sometimes file under the same label. For a direct-lung vaper, the real question is not only which coil to fit, but what that coil will ask of the mod and its batteries.

## Zeus tank, the short answer for direct-lung vaping

The **Zeus tank** is the line of sub-ohm tanks Geekvape designs for direct-lung vaping, renamed Z over the versions. Every generation takes Z Series coils, and the coil you pick sets the wattage, 50 to 60 W for the 0.4 ohm, 70 to 80 W for the 0.2 ohm, 70 to 85 W for the 0.15 ohm XM.

On the battery side the gap is clear. At 60 W, a 0.4 ohm coil draws about 21 A from a single cell, while a 0.15 ohm XM set to 85 W asks for nearly 30. The lowest-resistance heads are therefore more at home on a dual-battery mod, which splits that current between two cells.

## Three generations of tank under the letter Z

Geekvape has released its tank in several versions, and the product pages on its official store make it possible to tell them apart from the published figures. Three of them are still on retailers' shelves, and they do not all sit on the same mods.

| Version | Size | Published capacities | Coils in the box | Notable point |
|---|---|---|---|---|
| Z (Zeus) Sub-ohm | 26 mm wide, 42.5 mm tall without drip tip | 5 ml, 3.5 ml spare glass, 2 ml TPD version | Mesh Z2 0.2 ohm pre-installed, Mesh Z1 0.4 ohm | Air drawn in at the top and led down to the coil |
| Z Sub-ohm SE | 29 mm wide, 51.9 mm tall | 5.5 ml, 2 ml TPD version | 0.15 ohm XM pre-installed, 0.4 ohm | Safety lock on the fill cap |
| Z Subohm Tank 5 | 29 mm wide, 56.1 mm tall | 5.5 ml, 7 ml glass, 2 ml | Z 0.2 XM Boost pre-installed, Z 0.4 XM Boost | Attached fill cap that slides open |

The first difference to check for direct-lung vaping is the diameter. The original model is 26 mm, the two later ones 29 mm, a width that can overhang the top plate of a compact mod and is worth checking before moving from one generation to the next.

Capacities of 5 ml and above belong to the standard versions. In the UK, refillable tanks are capped at 2 ml, and each of these three generations comes in a 2 ml version for that market.

## Z coils for the Zeus tank, the range before the resistance

A resistance reading on your mod is not enough to set a Z coil. Geekvape's published coil guide gives each head its own wattage range, and two heads of the same resistance can carry ranges far apart. This table also gives the current drawn from the batteries at the top of each range, worked out further down.

| Coil | Resistance | Published range | Current from a single cell, top of range | Per cell, dual-battery mod |
|---|---|---|---|---|
| Z0.4 and Z0.4 XM | 0.4 ohm | 50 to 60 W | 20.8 A | 10.4 A |
| Z0.25 Dual | 0.25 ohm | 45 to 57 W | 19.8 A | 9.9 A |
| Z0.2 and Z0.2 XM | 0.2 ohm | 70 to 80 W | 27.8 A | 13.9 A |
| Z0.15 SS316L | 0.15 ohm | 60 to 70 W | 24.3 A | 12.2 A |
| Z0.15 XM | 0.15 ohm | 70 to 85 W | 29.5 A | 14.8 A |
| Z0.15 | 0.15 ohm | 80 to 90 W | 31.3 A | 15.6 A |

### Three 0.15 ohm heads, three ranges

Of all the values, 0.15 ohm is the most misleading. The classic head runs from 80 to 90 W, the SS316L steel version from 60 to 70 W and the XM from 70 to 85 W. A mod reading 0.15 ohm tells you nothing about the right wattage, and only the coil's reference settles it.

Setting an SS316L to 90 W pushes it 20 W above its range. Going the other way, a classic 0.15 ohm left at 60 W sits below its lower limit, which leaves the head more prone to flooding.

### 0.2 ohm and 0.25 ohm, two close values not to mix up

The 0.2 ohm, pre-installed in the original model and in the Tank 5, goes up to 80 W. By contrast, the 0.25 ohm Dual stops at 57 W, a range closer to the 0.4 ohm than to its neighbour in resistance.

The same guide notes that the P Subohm Tank takes Z coils except the 0.25 ohm. Compatibility is checked head by head, even within a family that carries the same letter.

### The 0.4 ohm, the head for single-battery mods

At 50 to 60 W, the 0.4 ohm is the most restrained of the family. The original model's page still rated it at 60 to 70 W, under its old Mesh Z1 name, and the newer range from the guide is the one used here.

At 60 W it draws 20.8 A from a single cell. It is one of the heads that leave the most headroom on a single-battery mod, with only the 0.25 ohm, capped at 57 W, asking for slightly less.

## What these coils ask of the mod and its batteries

On a regulated mod, the current drawn from the battery depends on the wattage set, not on the coil's resistance. It is estimated for the most demanding case, a battery close to cut-off, with the formula behind our battery headroom checker, P ÷ (3.2 V × 0.9).

This is how to read the table. A Z0.15 set to 90 W draws 31.3 A from a single cell, but 15.6 A from each cell of a dual mod. The Z0.2 at 80 W asks 27.8 A of a single cell, almost as much as a 0.15 ohm XM at its maximum.

Those figures are compared with the continuous discharge rating that each cell's maker publishes, not with the pulse rating. The wider the gap with that rating, the further the battery works from its limit.

A **Zeus tank** fitted with its lowest-resistance heads is therefore a better match for a [dual-battery high wattage vape](/uk/high-wattage-vape-kit/). A 0.4 ohm head leaves room for a compact mod, provided its top plate takes the tank's diameter.

## Top airflow, what it changes for a direct-lung draw

The original model combines direct top airflow with a top-to-bottom air path, a layout its product page links to the leak-proof function. The Tank 5 keeps adjustable top airflow, presented as a way to reduce the risk of leaks.

For direct-lung vaping the benefit is practical. E-liquid from a flooded coil finds no air inlet under the tank to escape through, whereas a tank with base airflow, such as the [Smok TFV12 Prince](/uk/smok-tfv12-prince-tank/), is more exposed.

The e-liquid matters as much as the air. A liquid high in vegetable glycerine is the usual choice on these wide-ported mesh heads, and our guide to the [PG VG ratio for direct-lung vaping](/uk/pg-vg-ratio-for-clouds/) explains what thickness changes for the cotton. In the UK, nicotine e-liquid is limited to 20 mg/ml and sold in bottles of 10 ml at most.

## Which Zeus tank to choose for your mod

Picking the right model depends less on its release order than on the mod carrying it. Battery count decides the coil, and top plate width decides the generation.

### On a single-battery mod

A 0.4 ohm head, set between 50 and 60 W, in any generation. The original model, at 26 mm, suits narrow top plates better than the 29 mm versions.

### On a dual-battery mod

Either the 0.2 ohm or the 0.15 ohm XM, at the top of their range for volume. Our pick is the Tank 5 with its 0.2 XM Boost, which covers generous vaping without going up to the 90 W of the classic 0.15 ohm.

### If you already own a Z tank

The coil guide lists the XM Boost heads as compatible with the Z Subohm Tank, its 2021 version, the SE and the Tank 5, as well as with the Aegis Legend 2, 3 and 5 kits. There is no need to change tank to use these heads, rated for up to 60 ml of e-liquid on the Tank 5's page.

## FAQ

A few practical questions about using the tank, alongside the guide above.

### How do you fill the Zeus tank?

From the top, on every generation. On the Tank 5 the cap stays attached, slides in the direction of the arrow to expose the fill hole, then pushes back into place. Fill without going right to the brim, then close the cap.

### Which drip tip fits the Zeus tank?

An 810 drip tip, wider than a 510 and suited to a direct-lung draw. The one on the Tank 5 is replaceable, so you can try another of the same size.

### How do you change the coil in a Zeus tank?

Take the tank off the mod, turn it over and unscrew the base. Z coils fit into it with a simple push. Once the new head is in place, fill the tank and let the cotton soak for a few minutes before taking a puff.

### Why is my Zeus tank leaking?

The most common causes are a base not screwed back fully, a pinched seal or a coil not pushed all the way in. A very thin e-liquid or a wattage too low for the head can also flood the coil.

### Zeus tank or Zeus X, what is the difference?

The Zeus X is a rebuildable atomiser, where you build the coil and fit the cotton yourself. With a Zeus tank, the heads come ready-made and are swapped without any building, which keeps maintenance simple.

## The Zeus tank is set by its coil and sized by its batteries

The **Zeus tank** is not a single tank but a line, and using it well starts with the exact reference of the Z coil inside. From the 0.4 ohm at 60 W to the 0.15 ohm at 90 W, the current asked of a single cell rises from 20.8 to 31.3 A, a gap that decides between a single-battery and a dual-battery mod.

The same reasoning holds well beyond the Zeus tank, for every sub-ohm tank, the coil's range first, the battery rating next, the width of the top plate last.

## More clouds

- [Geekvape T200 (Aegis Touch) for direct-lung vaping, the touchscreen in use](/uk/geekvape-aegis-touch-t200/)
- [Smok TFV12 Prince tank today, coils and what it is still worth](/uk/smok-tfv12-prince-tank/)
- [High wattage vape kits, power, batteries and e-liquid use](/uk/high-wattage-vape-kit/)

<em>La Voluterie writes for adults only. Vaping products may contain nicotine, an addictive substance, and vaping products are not for sale to anyone under 18 in the UK. This is editorial content, not advice to buy anything.</em>
